Announcement

Collapse
No announcement yet.

Polaris R/R - Triumph harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Polaris R/R - Triumph harness

    Hi. I am updating my son's CBR and am using the Polaris R/R and the Triumph harness adapter. On the harness, the leads out from the R/R to the battery are split.The brown and black wires that leave the R/R split into 2 so you have 2 brown and 2 black wires at the plug end. Question: Do I use just one each of the wires? Or should I connect the 2 browns to each other and the 2 blacks to each other and then run them to the battery?
    Thanks for any help.

    Mad

    #2
    You might be able to use just one of each, but I have connected mine together.

    If you are ever drawing the full load that the stator can support, there is about 20-25 amps possible.
    Just one of those small-ish wires would be struggling to carry it. I have connected the two, and run 10ga wire from there to the battery.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

    Working...
    X