Announcement

Collapse
No announcement yet.

Headlight bucket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Headlight bucket

    My headlight bucket is toast and I still have the original sealed headlight on my 78 gs750.

    Can anyone recommend an aftermarket 7" headlight assembly that uses an H4 bulb?

    I would like something that fits in the original headlight bucket arms and can fit the wires behind the lamp.

    Please Help!

    #2
    This is where I got my reflector. Can't offer any advice about replacement buckets though.

    Memotronics is your online source for lighting and industrial supplies. We stock over 2000 miniature, line-voltage and halogen bulbs for industrial, automotive, residential and commercial applications. Our automotive lighting selection includes vintage and hard-to-find bulbs for domestic and import cars, as well as a range of thermal, electronic and solid state flashers, including a range of turn sugnal flashers for aftermarket LED conversions

    Comment


      #3
      Bought one of these about a decade ago (emgo)



      Still works great.

      Comment


        #4
        Was there enough room for the wiring harness and did it fit in the stock bucket arms?

        Comment


          #5
          I'm on a stripped GK with 1100GL arms, the wiring did easily fit though. If there's a particular measurement you'd like I can take the tape measure to it. From what I saw looking up the picture just now they list two bucket types, a CB style and KZ style, with the KZ being a larger 7" pattern. I thought mine was the smaller CB style, and it doesn't seem to be a 7" model now that I think of it. :/

          So, seems my review of the linked light may have been made too soon, but any information on the smaller CB light you'd want I can offer. FWIW the EMGO lights seem to be of much better quality than most EMGO stuff.

          Comment


            #6
            Online it seems the 7" emgo light measures 6.5" between mounting points

            Comment


              #7
              Thanks for the quick reply RedBaron, I'll take some measurements and get back to you to make sure it will fit the stock arms

              Comment


                #8
                The stock headlight bucket measures about 7.5" between mounting points and the bucket arm mounts about 3" long from the forks

                Comment


                  #9
                  Hmmm... EMGO might be a little narrow for you then :/

                  Comment


                    #11
                    Ah, that one looks nice. Post your results!

                    Comment

                    Working...
                    X