Ignition / ignitor problem

[60ratrod]

I found one. It's not the best, but if you look closely by the pressure sensor you can see the plate has been relieved slightly.attachment.jpg

[ajkammerer93]

Thanks!! Great, so I'll go ahead and order myself a dyna S and if I end up with some install questions I can't figure out, I'll be back!!

Thanks all for the help!

[60ratrod]

My dyna s is on its way, so i'll do an install thread so we can have some solid documentation on it

[ajkammerer93]

Any luck with the install? I'm running into the problem with the magnet on the shaft that spins not clearing the magnets on the dyna ignition plate. Does anyone have some tips for installing the dyna s on an 82 650?? I managed to modify the plate to clear the oil pressure sensor, but like i said, the little magnet that spins contacts the magnets on the ignition plate. There are tiny little screws that hold the magnets on to the plate.. can I adjust the clearence that way? or by filing the center magnet? I'm nervous to mess with the screws holding the magnets to the plate, in case that is set a specific way.

SOMEONE HELP!

please? =]

[tom203]

Don't touch those screws. How about a pic to show this interference? The correct dyna supplied rotor should fit nicely on the suzuki advance and spin evenly by the magnets.

[ajkammerer93]

Hey Tom,

I'll take a picture when I get home later, but for now.. if you look at the previously posted picture, the notch that sticks out of the shaft and rotates (pointed up in that picture), is contacting the black magnets on the dyna plate. Should that notch magnet be removed and the black piece that came with the dyna system installed on the mechanical advance behind the plate? That little round black piece didn't seem magnetic to me. The install instructions are so vague..

Thanks all! Pic soon..

[tom203]

Wait till 60ratrod gets his dyna for his thoughts -I tbought the dyna rotor replaced the suzuki rotor. The black plastic thing probably has metal imbeded in it to interupt/trigger the dyna pickups.

[60ratrod]

I'm uploading the photos to photobucket now and i will be doing the install thread here in the next hour or so

[60ratrod]

the thread is up. i hope it helps man!

[ajkammerer93]

Perfect man! Thank you so much for taking the time to document and take pictures. Hopefully I'll be up and running shortly!