Announcement

Collapse
No announcement yet.

Trip Meter Odometer Repair - 83 1100E -

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trip Meter Odometer Repair - 83 1100E -

    I lucked into a set of 83 gauges to go on my 82 1100e .. the faux skunk... so now I can now go 140 mph.

    Anyway, the trip meter doesnt work on it. Neither does the set that was on my 82, or the set on my friends 82, or on the spare 82 set I bought off of ebay.

    Is there a repair out there for these obviously defective trip meters?
    82 gs1100e FAUX Skunk
    80 gs1000s

    #2
    I think they just get dirty. The gauges come all apart. Take a few pictures so you remember how to get it back together.

    The trip rest is a button with a spring in the front face portion of the housing. There is a lever on the Speedo that pushes some gears to do the reset.

    Comment


      #3
      Thanks Posplayr,

      Well I think I may have lucked out. I went ahead and installed the gauges, and the trip meter did re-set to zero's this time.

      I will have to ride it when we get some good weather to see if it ends up working right. Fingers crossed about that and especially whether or not the speedo works as it should. The tachometer is a little stuck until i rev it the first time, then it bounces up and works as it should.
      82 gs1100e FAUX Skunk
      80 gs1000s

      Comment


        #4
        Spray some lube down the rest knob shaft...cant hurt anything.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment


          #5
          Will do for sure!
          82 gs1100e FAUX Skunk
          80 gs1000s

          Comment

          Working...
          X