Announcement
Collapse
No announcement yet.
Dyna s install and rewire for the removal of igniter?
Collapse
X
-
Dyna s install and rewire for the removal of igniter?
I installed the dyna s in my 1982 GS750 and realized that I need to find out how to wire things back up since I had previously removed and dissected the igniter. Has anyone deleted the igniter and can offer some advice on wiring things up so it will function properly? Thanks in advance.Tags: None
-
This might help. It's for a Kawasaki but is essentially the same as a Suzuki GS:
The Dyna s Red wire goes to the Orange/White wire (switched +12V)
The Dyna s White wire goes to the coil White wire (1&4 coil)
The Dyna s Black wire goes to the coil Black/Yellow (2&3 coil)Attached Fileshttp://img633.imageshack.us/img633/811/douMvs.jpg
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.;)
JTGS850GL aka Julius
GS Resource Greetings
Comment