Need help make a wiring harness gs650 82-86

[Guest]

So 2 days ago I trades a guy an old compound bow for a beefy go kart Frame with a gs 650 82-86 stuffed into it if any one has an idea on this wiring so I can make the account turn on on a toggle with a push button start . I have the 2 ignition coils mounted to frame allready. The wiring harness I got from the guy has been hacked and cut so many times I can't figure any of it out. And I can't find a diagram online

[tom203]

I like creativity- more pics please. Here's a wiring diagram that shows what suzuki was thinking on...

[Slipshot]

Thx for the pic I will have to try a few things. Can I bypass the signal generater

[Brendan W]

Can I bypass the signal generater

Why are you thinking of that? Do you want to fit a different ignition system ?

[Slipshot]

No I just don't have it . I have a honda 750 bike motor looks identical could I pull a signal generater off it. If not is there a simpler way. Sry newbie here when it come to this kind of electrical

[Brendan W]

You could try fitting the 750 stuff. Bring over the igniter box as well just in case there is a mismatch. If that doesn't work out you could see if a set of points could be retrofitted.

[Slipshot]

Lol I'm a tard signal generater is same as the stator right

[Brendan W]

Signal generator sends a signal to ignitor to fire the sparks.
Generator, stator generate the electricty.

[Slipshot]

Is the signal generater attached to engine block or is it park of the wiring harness

[Brendan W]

The signal generator is the blue round thing top right of the pic Tom posted. It sits at the right side on the end of the crank.
The generator is the red round thing at the bottom right. It sits at the opposite end of the crank. The ignitor is usually around the battery box on a bike. It could be black about the size of a cigarette box with a six wire plug.