Announcement

Collapse
No announcement yet.

GS450 Coil Test. Am I doing this correctly?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS450 Coil Test. Am I doing this correctly?

    I watched some YouTube videos on this but just wanted to run it by you guys to be sure. Just got the bike back together and it turns over, but doesn't start. I figured the best thing to do was start with the ignition.


    #2
    3.9ohms for the primary is fine.
    11kOhms for the secondary is fine, across the naked secondary wires. 20 Kilo Ohms is right for both spark plug boots being in place - they each contain a 5KOhm resistor.
    ---- Dave

    Only a dog knows why a motorcyclist sticks his head out of a car window

    Comment

    Working...
    X