Announcement
Collapse
No announcement yet.
1983 Gs550 engine questions
Collapse
X
-
1983 Gs550 engine questions
I have a 1985 Suzuki lt 250 with a 1983 Gs 550 engine, Im having problems with the stock Ignition system. I lost spark in cylinders 1 and 4, Ive checked the coils and they work. Ive looked into replacing the parts but its pretty pricey. I would like to upgrade my ignition system but I haven't been able to find any aftermarket parts for the 1983 550e model, maybe a points ignition system would be better? if you have any ideas please let me know! thanks. -
There were a lot of the 550es around with blown igniters - not exactly sure what the problem was with them but they seemed to be fragile.
Have you checked the pick-up for that coil? Being on 1 and 4 that would be the next logical thing to check.Current:
Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)
Past:
VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
And a bunch of other crap Yamahas....
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35712
- Torrance, CA
There was a thread a few years back where someone fit a centrifugal advance unit from an early 550 and then used a Dyna S. Can't recall all the details but the thread is in the archives if you want to review.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Boychuks
Thanks! Ill probably check those out, I was thinking about trying to fit a dyna s but the kit is around $300 so I was holding back until i knew for sure. Ill also have to look into that timing advance thing, Ive narrowed the problem down to either cdi or the pulse generator.Last edited by Guest; 02-15-2017, 12:06 AM.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35712
- Torrance, CA
Dyna S is about $130Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35712
- Torrance, CA
Originally posted by Cipher View PostDyna ignition does not fit this engine.
This forum contains old posts which may have information which may be useful. It is a closed forum in that you can not post here any longer. Please post your questions in the other technical forums.
One issue though is getting the ignition cover to fit on after the mod.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Boychuks
I'm going to try the cheapest route right now and try the points ignition system on my 550. I feel like this would be cheap and easy for me to build considering I'm 17 and I'm not earning enough money to go out and purchase a dyna s kit, (it's more expensive since I live in Canada.) and I feel like it would be a cool experience. If it doesn't work I will be looking more into aftermarket parts.
Comment
-
Originally posted by Boychuks View PostI have a 1985 Suzuki lt 250 with a 1983 Gs 550 engine, Im having problems with the stock Ignition system. I lost spark in cylinders 1 and 4, Ive checked the coils and they work. Ive looked into replacing the parts but its pretty pricey. I would like to upgrade my ignition system but I haven't been able to find any aftermarket parts for the 1983 550e model, maybe a points ignition system would be better? if you have any ideas please let me know! thanks.
I like that. A lot.---- Dave
Only a dog knows why a motorcyclist sticks his head out of a car window
Comment
-
Boychuks
So far the points ignition swap is going smoothly, I purchased some points for a later model Gs, I made a plate to mount them on and took a lobe from a camshaft for the timing. Everything seems to be working. I'll have to do some adjusting to make sure the spark is at the right time, I'll put some updates out soon.
Comment
Comment