Announcement
Collapse
No announcement yet.
Sh775
Collapse
X
-
danbobberino
Awesome, I ordered it. Does anyone have a wiring diagram? I am not sure which terminal is positive and which one is negative on the sh775
-
There are two connectors. One has three terminals, the other has two. The one with three terminals is the input from the stator. Connect the three stator wires directly to the three inputs to the R/R, do not connect to the wires the disappear into the wiring harness. Yes, you can extend the wires as necessary to reach the R/R, but the electrical path should be direct from stator to R/R. In the connector with two terminals, the one closest to the stator inputs is your positive output. The termain farthest away is your ground.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
danbobberino
Originally posted by Steve View PostThere are two connectors. One has three terminals, the other has two. The one with three terminals is the input from the stator. Connect the three stator wires directly to the three inputs to the R/R, do not connect to the wires the disappear into the wiring harness. Yes, you can extend the wires as necessary to reach the R/R, but the electrical path should be direct from stator to R/R. In the connector with two terminals, the one closest to the stator inputs is your positive output. The termain farthest away is your ground.
.
Comment
-
danbobberino
Originally posted by Steve View PostThere are two connectors. One has three terminals, the other has two. The one with three terminals is the input from the stator. Connect the three stator wires directly to the three inputs to the R/R, do not connect to the wires the disappear into the wiring harness. Yes, you can extend the wires as necessary to reach the R/R, but the electrical path should be direct from stator to R/R. In the connector with two terminals, the one closest to the stator inputs is your positive output. The termain farthest away is your ground.
.
Comment
-
Originally posted by Nessism View Postebay search "polaris RZR regulator" then message a the seller of the cheapest one to confirm there is SH775AA printed on the top. If you receive confirmation, buy it. Going price is about $38 USD these days.1983 GR650 Tempter Rebuild - Completed and Sold
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Unfortunately, prices have jumped. Typically going price now is about $50.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
The big guy up there rides a Suzuki (this I know)
1981 gs850gx
1999 RF900
past bikes. RF900
TL1000s
Hayabusa
gsx 750f x2
197cc Francis Barnett
various British nails
Comment
-
Originally posted by Nessism View Postebay search "polaris RZR regulator" then message a the seller of the cheapest one to confirm there is SH775AA printed on the top. If you receive confirmation, buy it. Going price is about $38 USD these days.
Originally posted by EMFL View PostThis is the exact info I was looking for. Thanks for all the great infoJordan
1977 Suzuki GS750 (My first bike)
2000 Kawasaki ZRX1100
1973 BMW R75/5
Comment
-
Originally posted by hannibal View PostThat was written 2 years ago. From what I've learned, the Polaris unit comes marked with SH775BA. The SeaDoo units are marked with SH775AA.
1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
This one is cheaper...https://www.ebay.com/itm/Sea-Doo-Can...53.m1438.l2649Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
VABushPig
Stupid question about the SH775. The one I purchased is kind of faded and dirty. Would a coat of black spray paint hurt it? How hot does it typically get? If everything else looks new I want it to look new too.
Comment
-
Forum GuruPast Site Supporter
Super Site Supporter- Jun 2018
- 5543
- Mifflinburg, PA / Land of Tar & Chip
Originally posted by VABushPig View PostThe one I purchased is kind of faded and dirty.....Rich
1982 GS 750TZ
2015 Triumph Tiger 1200
BikeCliff's / Charging System Sorted / Posting Pics
Destroy-Rebuild 750T/ Destroy-Rebuild part deux
Comment
-
I've been looking for a couple good examples of these to save for future use, since the price on them is going up up up. Seems to be better prices on the SeaDoo versions, multiple going for $30ish w/best offer, so could probably get them down under $30 fairly easily.1982 GS850GL - Shaved seat foam and new seat cover; Daytona handlebars and Tusk risers; Puig "Naked" Windscreen\
1978 KZ200 - Mostly original, hydraulic front brake swap, superbike bars; purchased at 7k original miles
Track bike project: 2008 Hyosung frame w/ 97 gs500E engine swap (in progress)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Originally posted by Rust_to_Redemption View PostI've been looking for a couple good examples of these to save for future use, since the price on them is going up up up. Seems to be better prices on the SeaDoo versions, multiple going for $30ish w/best offer, so could probably get them down under $30 fairly easily.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment