Announcement
Collapse
No announcement yet.
1979 Suzuki gs550 manual.
Collapse
X
-
1979 Suzuki gs550 manual.
Does anyone have a manual for a 1979 Suzuki gs550 and could you tell me what voltage you are supposed to expect out of the stator? I am not sure if it is different for an E and an L but please post both if available. Thank you!Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35860
- Torrance, CA
Manual at the above link.
No load AC stator testing is not definitive. A good stator should make something like 75+ VAC, but even if it does it could still be weak at output under load.
The R/R grounds on the 550 were very poor so be sure to check those and run a jumper from the R/R straight to the battery. Also, be sure to run the stator wires directly into the R/R. The factory wiring ran one stator leg through the hand control which caused all kinds of issues.
Good luckEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
danbobberino
Originally posted by Nessism View Posthttp://members.dslextreme.com/users/bikecliff/
Manual at the above link.
No load AC stator testing is not definitive. A good stator should make something like 75+ VAC, but even if it does it could still be weak at output under load.
The R/R grounds on the 550 were very poor so be sure to check those and run a jumper from the R/R straight to the battery. Also, be sure to run the stator wires directly into the R/R. The factory wiring ran one stator leg through the hand control which caused all kinds of issues.
Good luck
Awesome! Thank you on all points!
Comment
Comment