Announcement

Collapse
No announcement yet.

1979 Suzuki gs550 manual.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1979 Suzuki gs550 manual.

    Does anyone have a manual for a 1979 Suzuki gs550 and could you tell me what voltage you are supposed to expect out of the stator? I am not sure if it is different for an E and an L but please post both if available. Thank you!

    #2


    Manual at the above link.

    No load AC stator testing is not definitive. A good stator should make something like 75+ VAC, but even if it does it could still be weak at output under load.

    The R/R grounds on the 550 were very poor so be sure to check those and run a jumper from the R/R straight to the battery. Also, be sure to run the stator wires directly into the R/R. The factory wiring ran one stator leg through the hand control which caused all kinds of issues.

    Good luck
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Originally posted by Nessism View Post
      http://members.dslextreme.com/users/bikecliff/

      Manual at the above link.

      No load AC stator testing is not definitive. A good stator should make something like 75+ VAC, but even if it does it could still be weak at output under load.

      The R/R grounds on the 550 were very poor so be sure to check those and run a jumper from the R/R straight to the battery. Also, be sure to run the stator wires directly into the R/R. The factory wiring ran one stator leg through the hand control which caused all kinds of issues.

      Good luck

      Awesome! Thank you on all points!

      Comment

      Working...
      X