.png "Powered by vBulletin")
I had so much trouble with the electrical system on my 82 gs850g that I removed the wiring harness and just started from scratch. I connecting my coils to the hot lead and the other lead to my pick-up coil but get no spark. Any suggestions are greatly appreciated. PS: All lights work
-
-
Ahhhhh? Where is your igniter to drive the coils? Can't just connect the pick-up coil directly to the coils unless you have something like a Dynatek Dyna-S or something like it.
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.
JTGS850GL aka Julius
GS Resource Greetings
-
OK, I'm electrically lost. I'll see if I can find the ignitor and connect it. Do I need the Dynatec to complete this circuit?Comment
-
If you use the stock igniter, then you wont need anything else. If you use the Dynatek igniter, it will replace the pickup coils and the stock igniter. Wires directly to the coils.Originally posted by Bob Shaw View Post
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.
JTGS850GL aka Julius
GS Resource Greetings
Comment
-
OK, Thanks. I'll give this a shot. I may be back with more questions.....Comment
Comment