Help on wiring left signal contrôler.

[Guest]

Does anyone know what wires go where and which ones need to be combined? Imy trying to rewire a new Switch but can't seam to get it right. I have the wiring schematics for the whole bike but it's quite confusing. When 4 wires are in a row on the schematic does that mean they need to be wired together?

I'm confused. Been at this for 2 days now.

[Brendan W]

Is the switch a GS part?
Are you soldering inside the housing or just trying to get under tank plugs to talk to each other?
Wired together just sounds bad
Pic of what's causing the confusion would be good.

[Nessism]

The answer is the same as it was yesterday. Here is your first thread in case you forgot...http://www.thegsresources.com/_forum...t=#post2412761

Simplest way forward is to purchase a good used hand control from ebay and then install it. http://www.ebay.com/itm/82-Suzuki-GS...JZVnjv&vxp=mtr

[Dre]

The switch is a generic one I found online. The wires behind the original one have all been cut and Im starting from scratch. 20170714_162433.jpg

[Nessism]

Found this using Google search...

[Dre]

No need to be a jerk. Just wondering if someone knows the wiring order. If you don't then don't reply.

[Dre]

This does not help

[Nessism]

Don't start multiple threads on the same topic. Bump your existing thread and don't litter the forum with duplicates.

[Nessism]

Get a pin out schematic on this generic switch you bought and then draw a wiring diagram. After you have your sketch come back and post it here and someone will tell you if it will work. All this goes out the window if you don't know what your switch is doing.

[Dre]

So the simple answer is you don't know so stop replying cause you're littering my thread.

[Nessism]

What the F does "wiring order" mean anyway?

[Dre]

Well, because you don't know anything about this but you insist on commenting... first you connect the low beam switch to the white wire. Then the yellow to the high beam switch then the sb wire to the relay...etc... there's an order on a rewire.

Maybe Eddy should keep out of a conversation he knows nothing about.

[JJ]

Well, because you don't know anything about this but you insist on commenting... first you connect the low beam switch to the white wire. Then the yellow to the high beam switch then the sb wire to the relay...etc... there's an order on a rewire.

Maybe Eddy should keep out of a conversation he knows nothing about.

Maybe you should buy the correct control if you don't know anything about wiring...

[jjbmxer]

well what JJ said the right control would be color coded correct.

[JJ]

So the simple answer is you don't know so stop replying cause you're littering my thread.

No...............