Announcement

Collapse
No announcement yet.

Volt Quick Test w/o Tach

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Volt Quick Test w/o Tach

    Hey all, not sure if this is the right place to post. Bit of an odd problem with my charging system and following all the great posts here (quick test) as my tachometer is not working.

    Readings as of now after sitting on charger for about 4hr:

    13.25 nothing on
    12.35 with ignition on
    13.00 idle

    Seems to hit about 13.5-14.5 at 2500 RPM, then rockets up to 16.5-17 with rev at 5000 RPM. Problem is im not sure exactly the RPM and just going off my ear. If for example im actually revving at 6500 RPM is 16.5-17 volts normal or okay?

    My gut says bad regulator and probably an unhealthy battery as a result of being overcharged for the last year. Any help would be much appreciated!
    Last edited by Guest; 07-17-2017, 05:34 PM.

    #2
    Way too high, regulator's dead, or about to give up the ghost.

    Replace ASAP.

    Battery seems to have taken a beating but still holding up.

    Continuing to use the bike will damage the battery, among other things.

    Edit: Depending on how long the bike was used like this, do begin to look for replacement bulbs, as they will have a greatly reduced life expectancy.
    #1: 1979 GS 550 EC "Red" – Very first Bike / Overhaul thread        New here? ☛ Read the Top 10 Newbie mistakes thread
    #2: 1978 GS 550 EC "Blue" – Can't make it a donor / "Rebuild" thread     Manuals (and much more): See Cliff's homepage here
    #3: 2014 Moto Guzzi V7 II Racer – One needs a runner while wrenching
    #4: 1980 Moto Guzzi V65C – Something to chill

    Comment


      #3
      Your R/R is bad. Search out info on the SH775, there are about a bazillion posts about them and why they are the best option. you can get one for $40 shipped off ebay, and then order up the Triumph connector plug. Again, search out info, this is an extremely common topic.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        +2 on bad regulator; probably did not stress too much (although 17V is getting high)

        Comment

        Working...
        X