GS 750 Cafe - Wiring Left Switch

[Guest]

Hello Guys!

My name is Aris and i am from Mykonos, Greece,


Currently i am building a GS 750 into a cafe racer. I need your help as i am trying to change the left original switch to a aftermarket and i am completely new with the wiring.
The cables that are going to the the left switch from the main harness as you can see in the photo are:

ORANGE: Power from ignition switch
WHITE: Lighting switch to dimmer switch
YELLOW: HIGH BEAM
GREY: ILLUMINATION LIGHT
BLACK: Left hand turn signal
LIGHT GREEN: Right hand turn signal
LIGHT BLUE: Turn signal main
GREEN: HORN
BLACK/WHITE: GROUND
WHITE RED: NO IDEA

On the other hand the aftermarket switch has:

DARK BLUE: LEFT TURN
RED: TURN SIGNAL MAIN
LIGHT BLUE: RIGHT TURN

GREEN: SPLITS TO 4 CABLES
GREEN 1 to HORN
GREEN 2 to Light Signal
GREEN 3 to LIGHT SWITCH
GREEN BLACK to LIGHT SWITCH

WHITE BLUE: SPLITS TO 2 CABLES
WHITE 1 to LIGHT SIGNAL
WHITE 2 to low/high beam

GREY to HORN
YELLOW to LIGHT SWITCH
BLACK to low/high beam

I will really appreciate if you can help me with the wiring if this is possible to be done with this switch.

Thanks a lot
93265141-5273-4A5D-A63B-E6D15F58A417.jpg

[jmkgarage]

original wiring to left switch

original wiring to left switch

C6D15626-FAB0-494B-A898-18C360F1EFC5.jpg

[jmkgarage]

after market switch
8F524CBB-B360-4C60-9FC7-DCE09312129A.jpg