Which dyna 2000 igniton is right for me?

[Guest]

Hi, I have a 83 gs750e 16v . I want to get a Dyna ignition but they don't seem to make one for my year model. Does anyone know which one I need and what I'll have to do to install it? Thanks for anyones advice

[tom203]

Hi, I have a 83 gs750e 16v . I want to get a Dyna ignition but they don't seem to make one for my year model. Does anyone know which one I need and what I'll have to do to install it? Thanks for anyones advice

Sadly, none. Your bike came with the ignition advancer built into the ignitor. The dyna2000 needs the mechanical advancer found on older models. You might be able to adapt a mechanical advancer to your bike, but you might run out of room.

[Flatline_Racing]

I don't know which one you need either, but the Dyna 2000 does NOT require a mechanical advances, your advance curves are selected by a switch on the main box. The Dyna S on the Other hand does require the mechanical advancer

[GregT]

I don't know which one you need either, but the Dyna 2000 does NOT require a mechanical advances, your advance curves are selected by a switch on the main box. The Dyna S on the Other hand does require the mechanical advancer

This is correct. Measure the OD of the trigger mount plate you currently have and ask Dynatech if they make a Dyna 2000 with this size mount plate.
If they don't it is possible to remount the Dyna triggers on a different size backplate. I've done it for other engines.

[tom203]

Me bad! You guys are right.. I was thinking about the cheaper dyna s setup.