thanks.
Announcement
Collapse
No announcement yet.
Tip for getting wires in sleeve?
Collapse
X
-
Tip for getting wires in sleeve?
Installing a new electro sport stator. Any tips on getting the 3 yellow wires through the plastic sleeve? Can get 2 easily, but not 3.
thanks.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
You might try shooting some WD-40 inside the tubeEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
If you have terminals on the ends of the wires, don't push all three through at the same time.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
RobP
-
Find a piece of solid wire. Household 14 gauge is good- or a piece of wire hanger-Tightly tape the 3 wires near the end of the solid wire. Push the solid wire thru, then the pull stator wires thru. When you tape the 3 wires to the solid wire set each one back a bit so the pack of wires is like a wedge shape.Last edited by dorkburger; 10-30-2017, 11:07 PM.sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/
Comment
-
Originally posted by dorkburger View PostFind a piece of solid wire. Household 14 gauge is good- or a piece of wire hanger-Tightly tape the 3 wires near the end of the solid wire. Push the solid wire thru, then the pull stator wires thru. When you tape the 3 wires to the solid wire set each one back a bit so the pack of wires is like a wedge shape.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
Comment