.png "Powered by vBulletin")
I’m struggling to find a location for the installation of a SH775 on my Katana. It’s too large to fit in the same location as the stock R/R and there is no room anywhere close to the battery box. The best spot I can find is in the tail piece. I know that ideally the R/R should have a very short ground connection to the battery or SPG. Would I be inviting any problems by installing in the tail piece?
-
-
Should be fine. Just be sure you have a good clean ground. Or better yet, run a wire back to the battery. You can follow the tail lamp harness route.Last edited by Nessism; 03-21-2018, 02:52 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
not sure what the kat's area looks like but is there room on the bottom of the battery box?1983 GS 1100 ESD :DComment
-
Nope. It’s all very tight in there. If I had pods/no air box I’d have all kinds of room. But it’s stock and I want to keep it that way.Originally posted by greg78gs750 View PostComment
-
I wonder if lack of air flow would cause issues?78 Gs 1000, 94 Honda Xr600Comment
Comment