Announcement

Collapse
No announcement yet.

Stop indicator light

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Stop indicator light

    Just came back from a 350 mile round trip to Backfire in Seattle and noticed on the way home my stop indicator light was flickering even though the brake light was working fine. Anyone have any idea what causes this? I’ll give my critique on Backfire tomorrow.

    #2
    No idea what bike we're talking about. Please update your signature.
    #1: 1979 GS 550 EC "Red" – Very first Bike / Overhaul thread        New here? ☛ Read the Top 10 Newbie mistakes thread
    #2: 1978 GS 550 EC "Blue" – Can't make it a donor / "Rebuild" thread     Manuals (and much more): See Cliff's homepage here
    #3: 2014 Moto Guzzi V7 II Racer – One needs a runner while wrenching
    #4: 1980 Moto Guzzi V65C – Something to chill

    Comment


      #3
      Originally posted by roeme View Post
      No idea what bike we're talking about.
      The only clue we might possibly have is that his username is "red1100".

      I think that the 1100E came with a "monitor panel" that monitored some functitons, including the brake light. If the actual brake light was fine, check the condition of the solder connections on the circuit board in the monitor panel. I have heard that some of them had problems with "cold" solder joints. Simply re-heating the solder joints on the board, letting the solder re-flow in the joint might clear up your problem.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Could also be the switch under the brake lever needs to be cleaned and adjusted.
        1983 GS850G, Cosmos Blue.
        2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
        2015 Yamaha FJ-09, Magma Red Power Corrupts...
        Eat more venison.

        Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

        Celeriter equita, converteque saepe.

        SUPPORT THIS SITE! DONATE TODAY!

        Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

        Comment


          #5
          The stop light warning on the monitor panel.83GS1100E13AE5847-7EBC-4CDE-959B-BBF57BA9E9DA.jpg

          Comment


            #6
            Just do like I did, any lights in the panel that came on randomly or I didn't really care about, I removed the bulbs. lol
            1982 GS1100E "Jolene"

            Comment


              #7
              Another thought to add here:

              Had same 'brake light' warning flash on panel. Over about a month and maybe a thousand miles....the occasional flicker became not so occasional. Then (I think) headlight warning light flashed then steady. Checked and cleaned all related connections / connectors. Turned out that the "Lamp Outage Warning Relay" had failed. Purchased a good used one from a former GSR member....10 years later...all is still well.

              Comment


                #8
                Does one relay do all the indicators?

                Comment


                  #9
                  I believe so,, yes...…. red1100 what is going on?

                  Comment


                    #10
                    Flickering indicator light

                    The indicator light seems to flicker even though the light itself is always on.Brake light and taillght only,involved.

                    Comment

                    Working...
                    X