Announcement
Collapse
No announcement yet.
Opinions on RM Stator Crimper
Collapse
X
-
fixmybrokecomputer
-
fixmybrokecomputer
-
sure, generic multi-brand crimper for $10 why not? However, be aware that those dies are changeable..that is different connectors require different dies put into the tool. For instance, the bullet-connectors with the plastic covering use one die (in three wire sizes) but uninsulated connectors (that go into the multi-wire plastic plugs also present on Suzukis use another set of dies...
Ideally, it's nice to have these dies available to suit the ratchet tool you have.crimper dies.JPG
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Those RM Stator crimp pliers seem to have the type of jaws that roll over the tangs on OEM type terminals. I'd get them.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
There was no link given, so I had to look it up to see what the price was.
$19, which is rather inexpensive. However, as gorminrider mentioned, make sure there are other dies available for other types of crimps.
I got my crimpers from Vintage Connections. They were $35 when I got them (they are $40 now), but there are other dies available, too. I got those, too, but am about to get a second set of crimpers, so I don't have to keep changing the dies.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
fixmybrokecomputer
Comment
-
..but am about to get a second set of crimpers, so I don't have to keep changing the dies.
Those RM Stator crimp pliers seem to have the type of jaws that roll over the tangs on OEM type terminals. I'd get them.
Comment
Comment