Announcement

Collapse
No announcement yet.

Regulator choices

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Regulator choices

    RR died and doesnt put out a charge on my 650 a while back and I finally had time to go through and check it out.
    So far I've found the recommendation of the sh775 which are $60 for a clone and double for an OEM plus whatever is needed for a harness update. Also found a suzuki clone regulator from Caltric(good reviews) for $20.
    Recently stuck a dyna ignition kit on it if that makes a difference, otherwise bike is pretty stock.
    Last edited by Guest; 07-20-2019, 10:48 PM.

    #2
    SH775. If you don't believe me spend two minutes searching here and you will read overwhelming positive reviews.

    You can get a nice clean used SH775 for a reasonable price (I've got two that I'm about to test and resell). And you can use regular spade terminals and RTV in the cavity if you are too cheap to spring the $10 for a proper harness. You can pay now or pay later.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Originally posted by jcskokos View Post
      So far I've found the recommendation of the sh775 which are $60 for a clone and double for an OEM plus whatever is needed for a harness update.
      Please don't kid yourself, THERE IS NO CLONE.

      There are several cheap Chinese knock-offs, but they only SORT OF look like an SH775. Electrically, they are not even close.

      Your only choices, if you want an SH775, are from Polaris or Sea-Doo. Used is no problem. Look for dirty ones in the eBay pictures.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        i would save myself the bother of looking and buy one from nessism, it will work and be reasonably priced, and you wont have to scour ebay and wonder if you have the genuine article.

        Anything else is an inferior substitute.
        1983 GS 1100 ESD :D

        Comment


          #5
          I haven't tasted the SH775 Koolaid ....the old SH232s are pretty rugged. I haven't had a single failure of these on 7 bikes.

          Comment


            #6
            Originally posted by Gorminrider View Post
            I haven't tasted the SH775 Koolaid ....the old SH232s are pretty rugged. I haven't had a single failure of these on 7 bikes.
            Consider yourself blessed! My SH-232 consumed two stators in its thirst for power.
            1981 gs650L

            "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

            Comment


              #7
              Originally posted by tom203 View Post
              Consider yourself blessed! My SH-232 consumed two stators in its thirst for power.
              Haha! So true. R/R failure is not the main charging system failure point, it's a burned out stator. And a shunt type R/R will put your stator at risk unless you have a series type R/R like a SH775 to protect it.
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8
                Originally posted by Nessism View Post
                SH775. If you don't believe me spend two minutes searching here and you will read overwhelming positive reviews.

                You can get a nice clean used SH775 for a reasonable price (I've got two that I'm about to test and resell). And you can use regular spade terminals and RTV in the cavity if you are too cheap to spring the $10 for a proper harness. You can pay now or pay later.
                I am interested in one of the SH775's if the OP is going to only want one? Please PM if you are able to sell me a tested good one. Thanks,Bill

                Comment


                  #9
                  I just went back and re-read the first post:
                  Originally posted by jcskokos View Post
                  RR died and doesnt put out a charge ...
                  Before you buy ANYTHING, follow the advice in Nessism's signature.
                  To measure is to know.
                  Your R/R might be just fine, it just happened to kill the STATOR. When either one dies, you will have a "no charge" situation, but it's usually the stator that dies, not the R/R.

                  That being said, you should still get the SH775 R/R (along with a new stator) to prevent future issues.

                  .
                  sigpic
                  mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                  hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                  #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                  #2 son: 1980 GS1000G
                  Family Portrait
                  Siblings and Spouses
                  Mom's first ride
                  Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                  (Click on my username in the upper-left corner for e-mail info.)

                  Comment


                    #10
                    I noticed this guy is selling a lot of two new ones for a little less, anyway. I bought a new one here for my "replacement of a replacement" project.

                    https://www.ebay.com/itm/Lot-Of-2-SH775-voltage-regulator-rectifier-BRP-Honda-Suzuki-Triumph-Kawasaki/264389635732
                    http://www.thegsresources.com/_forum...ine=1352313915
                    1979 GS1000

                    Comment


                      #11
                      Any comment about SH775AA.....? and SH775AB.....?
                      http://webpages.charter.net/ddvrnr/GS850_1100_Emblems.jpg
                      Had 850G for 14 years. Now have GK since 2005.
                      GK at IndyMotoGP Suzuki Display... ... GK on GSResources Page ... ... Euro Trash Ego Machine .. ..3 mo'cykls.... update 2 mocykl


                      https://imgur.com/YTMtgq4

                      Comment


                        #12
                        You can purchase a proper wiring harness from any Triumph dealer for under $10. Go for it. That is after you have tried Steve's advice on finding the real cause of your problem.
                        Larry

                        '79 GS 1000E
                        '93 Honda ST 1100 SOLD-- now residing in Arizona.
                        '18 Triumph Tiger 800 (gone too soon)
                        '19 Triumph Tiger 800 Christmas 2018 to me from me.
                        '01 BMW R1100RL project purchased from a friend, now for sale.

                        Comment


                          #13
                          Originally posted by Redman View Post
                          Any comment about SH775AA.....? and SH775AB.....?
                          Sea-Doo and Can Am seem to use the AA's. Functionally identical to the AB's as far as I can tell.
                          Ed

                          To measure is to know.

                          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                          Comment


                            #14
                            Originally posted by gsgeezer View Post
                            I noticed this guy is selling a lot of two new ones for a little less, anyway. I bought a new one here for my "replacement of a replacement" project.

                            https://www.ebay.com/itm/Lot-Of-2-SH775-voltage-regulator-rectifier-BRP-Honda-Suzuki-Triumph-Kawasaki/264389635732
                            Those are a pretty good deal for guys that prefer new.
                            Ed

                            To measure is to know.

                            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                            Comment


                              #15
                              I've seen a single new SH775 for $100. $180 for 2 is a good deal.

                              SH775BA is the Polaris unit. Polaris part number 4012941.
                              SH775AA is the Seadoo unit. Part number 710001103.
                              Jordan

                              1977 Suzuki GS750 (My first bike)
                              2000 Kawasaki ZRX1100
                              1973 BMW R75/5

                              Comment

                              Working...
                              X