.png "Powered by vBulletin")
Blinker problem 82gs1100g
Okay I'm stuck. Have this gs1100g and took off the back end.. installed OEM blinkers on back and I finally got them wired up(to what I believe is correct) BUT the front blinkers act as running lights and I cant get them to blink when I use the blinker switch. Troubleshooting, i can get them to blink, but only all four at the same time. I'm totally stuck..
-
-
Check your grounds first and make sure each signal is grounded to the frame.Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride" -
The front lights should be dual-pin bulbs, likely #1157. They do, indeed, have a running light function when the dimmer filament is connected to the brown wire in the headlight shell. The rear lights should be single-pin bulbs, likely #1156, and will be turn signals only. The left signal (front and rear) should be connected to the black wire, the right signal (front and rear) should be connected to the green wire.
Although you say you have OEM signals, please verify the bulbs inside.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment