Need to rewire my starting circuit, can someone break it down easily for me?

[Big T]

That's burned. Chuck one end in a drill to spin it, and hold a fine emery paper strip against it and see if it cleans up

What do the brushes look like?

[Vamisk]

I cleaned it up on the inside pretty good and jumped it. It spins a lot faster now so we'll see if it was good enough.

The brushes looked like burnt toast but brakekleen got moet of the grime out of there. If it still doesn't crank I'll buy some brushes and such.Snapchat-1039475289.jpg

[Vamisk]

By chance does anyone know what size screw sits right here in the starter switch? I've spent all day tracking down potential electrical issues. By the way the highest voltage I got out of my batter was 9.6 hahah but I'm using a cheap autozone meter. I installed a new relay and tried to start it. It was in 2nd and jumped so I guess my clutch needs adjusting too.
Snapchat-2126617200.jpg
To specify, it's the very bottom hole below the orange wire. I don't know if it's the same size as the others

[Redman]

........................ tried to start it. It was in 2nd and jumped so I guess my clutch needs adjusting too.
.......s

Not necessarily. If it then broke loose , then it could just be that since is cold the oil in the clutch plates grabbed a little for a little while.

I cant help with the screw size.
But good to see you made progress with the starter.
(Stocker Starters is good for rebuild kits.)

[Vamisk]

Thanks Redman. I ordered a rebuild kit. Whether or not the starter is bad i might as well get it rebuilt while i'm doing all this.

[Vamisk]

Howdy fellers, thought i would give you all a quick update, it's bad.

Well i finally got my brakes together and working. I thought it was weird how the starter would click but do nothing so i tried to pop start it, my buddy told me the tire was skidding all the way down.

went inside and took the clutch case off, the clutches were wasted.

took the spark plugs out and the second cylinder from the left was toast. the piston was smacking the hell out of the plug. I lost the plug end, probably threw it in frustration so i don't have any pictures.

Needless to say, if anyone needs some parts just send me a message.