Announcement

Collapse
No announcement yet.

Timing all messed up on 1979 gs750

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Timing all messed up on 1979 gs750

    Good afternoon all! Trying to get my timing set on my gs750. I set cylinder to tdc on the mark on the spark advance according to my manual. I checked cylinder 4 and it was not at tdc. I turned the crank and tdc was at the 1T mark on the spark advance. I have no idea how to fix this. Timing is all messed up now. Help please!
    Kevin

    #2
    1T IS TDC for 1 and 4. Youll see a 1-4 marking the 2 cylinders the timing mark applies to. youll see a T and an F. T is top dead center for both 1 and 4 since they both go up and down in tandem. What is it your trying to accomplish?
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment


      #3
      Thank you for the reply. I am trying to get the timing correct
      After more investigation I found I may have a bad condensor..

      Comment


        #4
        reset the points gaps while youre in there. use a timing light to get it spot on.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment


          #5
          Thank you for the reply. I am trying to get the timing correct
          After more investigation I found I may have a bad condensor..

          Comment


            #6
            As it turns out there is no spark on cylinders 1 and 4 but good spark on 2 and 3. The condenser for the 1 and 4 points is bad. Soon as those come in I will be fixing them.

            Comment

            Working...
            X