.png "Powered by vBulletin")
Anyone know what size puller I need to replace the magneto rotor for an 82 gs1100gl?
-
1982 GS1100gl -
My rotor puller appears to be 30mm ID for 84 1150, that I believe I used on 80 chain drive.
I just looked in my Haynes manual 1100 fours 1980-1983, but no list of shaft models.
Maybe cross reference your rotor # to 1980-1982 chain 1100 bike to see if it matches.
The part # for the rotor puller in the Haynes manual I have page 64 shows
PN#09930-34911GS\'s since 1982: 55OMZ, 550ES, 750ET, (2) 1100ET\'s, 1100S, 1150ES. Current ride is an 83 Katana. Wifes bike is an 84 GS 1150ES -
Will do thanks for the info1982 GS1100glComment
-
Checked the part number that you listed. Apparently it is compatible with my model. So that good. It's also $80. That's not so goodOriginally posted by Carter Turk View Post
Edit: found other compatible ones that will work for not so much. Apparently 82-83 GS1100's used both 30mm and 35mm. So I measured mine as best I could and found it to be 35mm. Wondering if how they did it was 30mm for chain drive and 35mm for shaft drive. But anyway, thanks for the help!Last edited by Greg7; 05-15-2020, 10:03 PM.1982 GS1100glComment
-
I saw one on ebay for $39. 30mm x1.5mm.
Just search for your model, a lot of pullers come up.
Apparently 11 Suzuki bikes were listed/compatible for this puller when I looked.GS\'s since 1982: 55OMZ, 550ES, 750ET, (2) 1100ET\'s, 1100S, 1150ES. Current ride is an 83 Katana. Wifes bike is an 84 GS 1150ESComment
Comment