Announcement

Collapse
No announcement yet.

Resistance is futile (or infuriating!!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Resistance is futile (or infuriating!!)

    I just got ripped off by an Ebay seller who listed B8ES plugs but sent me BR8ES. When I queried it he gave me the old "they no longer make the B8ES and the BR8ES is the equivalent". Clearly a bait and switch exercise but given that it I'd have to spend half what they cost to send them back I decided to keep them and leave negative feedback.

    Using helpful info I found on this forum, I decided to order replacement plug caps, bypass the resistor, and use them with the BR8ES plugs. The XB05F versions have the little screw you can remove to access the resistor but to my dismay I found the the VB05F version has the resistor molded in (no removable screw). Anyone else run into this problem and if so what was the solution? Just wondering if there's more than one version of the VB05F out there?

    Mark

    #2
    Initiate a return and toggle "doesn't match description or photos." Once you do that it's the sellers responsibility to pay the return shipping.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      I'd return them too. There isn't another workaround unless you replace all the coil wires with non resistor type...
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        It is preferred to have some resistance in the ignition system.
        There are three places where it can be introduced:
        1. wires
        2. caps
        3. plugs

        You can have the resistance anywhere you want, but it should be only ONE.

        The stock system has solid (non-resistor) wires, resistor caps and non-resistor plugs.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Not just ebay I ordered B8ES from Z1 and got BR8ES when I called them they told me they don't make B8ES more. When I pointed out that they are still available on Amazon
          he said we don't stock them anymore. He said I could return them but i would have to pay retune shipping. It is no wonder that these places are loosing business to other places with good customer service
          82 GS1100E, 82 GS1100GK, 2014 BMW R1200GS, 2015 Indian Chieftain

          Comment


            #6
            Where are others getting B8ES plugs from? None of the auto parts stores around me (Advanced + Autozone) stock them anymore. Amazon lists B8ES spark plugs but recent reviews state that they're receiving resistor plugs.
            1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
            1977 GS550
            1977 GS750 - Cross country trip thread

            Comment


              #7
              I just bought 12 of the B8ES plugs from PartsFish online through my local dealership. They are available.
              Larry

              '79 GS 1000E
              '93 Honda ST 1100 SOLD-- now residing in Arizona.
              '18 Triumph Tiger 800 (gone too soon)
              '19 Triumph Tiger 800 Christmas 2018 to me from me.
              '01 BMW R1100RL project purchased from a friend, now for sale.

              Comment

              Working...
              X