Announcement
Collapse
No announcement yet.
Well, that was weird...
Collapse
X
-
Well, that was weird...
Didn't know exactly where to post this so here goes. I finally got the big 1000G legal yesterday and decided to tool on down the highway a bit. Decided to head out to Competition Accessories and poke around. Got some really nice complements from a couple sales guys there who remember the old bikes fondly. Anyway, more to the point, As I was heading back across I-70, all of a sudden, the bike went completely dead. Nothing. So, I pulled over to the shoulder and stopped. Tried to start it back up right away and it acted like it wanted to start, but wouldn't. So, I got off and started looking it over trying to find some indication of something wrong, but nothing appeared to be wrong. After several minutes, I decided to try starting it again and this time it started up. Ran fine the rest of the way home. I hate things like that...not knowing what happened. So, at this point, I'm feeling somewhat distrustful of the old girl. Anybody have any ideas??Current Bikes:
2001 Yamaha FZ1 (bought same one back)Tags: None
-
emjay
-
guitarjedi
check all your electrical. even in the headlight bucket. Mine was sporatic like that and it was the plug in the headlight bucket.
Comment
-
André
My honda 650 had a vacuum valve on the fuel line, the little hose from the carb to open it had a too tight loop once and when it get hot it got close so the valve stop the fuel. It took me sometime to figured that one out. The bike stop when hot and start again after few minutes. It maybe electrical also, check connections at kill switch,ignition, coils etc.
Good luck.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
Replace all your glass fuses & clean up the fuse box. You can have a bad one that looks good. Also check the connections on the kill switch & ignition key switch.
I would also check the coil connections & ignitor connections too..
I am distrustful of Suzuki Ignitors after 30 years at the best of times & for ultimate reliability would switch one out to a Dyna S.1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
DanTheMan
-
almarconi
Although your bike is a 10 cosmetically, it sounds like the PO was negligent on the maintenance and/or the bike sat for a very long time (judging from all the grief you had with the carbs).
If I were you, I would start in the headlight bucket and work my way to the taillight cleaning every connection. It will probably take you half a day but it will be well worth it. Deoxit is an excellent product for this, they sell both a cleaner and a protectant.
Comment
-
Originally posted by almarconi View PostAlthough your bike is a 10 cosmetically, it sounds like the PO was negligent on the maintenance and/or the bike sat for a very long time (judging from all the grief you had with the carbs).
If I were you, I would start in the headlight bucket and work my way to the taillight cleaning every connection. It will probably take you half a day but it will be well worth it. Deoxit is an excellent product for this, they sell both a cleaner and a protectant.Current Bikes:
2001 Yamaha FZ1 (bought same one back)
Comment
-
Danjal
Pop your fuel cap off once and see if your tank is rusted internally. Mine did the same thing once. Im cleaning my tank now.
Comment
-
TheCafeKid
Check the power feed going into the connector on your fuse block. Neglect of an overcharging system will melt and or loosen the pins in the connector and cause it to cut out intermitantly. Had that happen on my ES right in the midst of being heeled over hard in a turn. Was a puckering moment.
Comment
-
Originally posted by TheCafeKid View PostCheck the power feed going into the connector on your fuse block. Neglect of an overcharging system will melt and or loosen the pins in the connector and cause it to cut out intermitantly. Had that happen on my ES right in the midst of being heeled over hard in a turn. Was a puckering moment.
On a side note, man I'm sorry to hear about you and Rose going down over in Indiana. Sure hope you two are physically ok. Hope the ES isn't too trashed either. Gravel SUCKS!Current Bikes:
2001 Yamaha FZ1 (bought same one back)
Comment
Comment