Announcement
Collapse
No announcement yet.
what is the thickest oil we can use?
Collapse
X
-
jtrip
this sounds stupid but its the top part of the motor the very top where the half moons are if that makes since
-
BassCliff
Hi,
My half-moons have been through 3 valve adjustments now and are starting to leak a little. I've got extra sets so I'll be replacing them at my next valve check. In fact, I'll probably install them inside-out just to be different.
Thank you for your indulgence,
BassCliff
Comment
-
jtrip
-
BassCliff
Hi,
If the breather is clogged it could exacerbate the issue.
Thank you for your indulgence,
BassCliff
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35640
- Torrance, CA
That 5W-40 Rotella will be thicker than 15W-40 when the temps are really hot so not sure what you are trying to accomplish.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
jtrip
well i pulled the breather hose off this morning and guess what the leak stoped so far. but i still will change the oil out to the 15w-40 as hot as it is here i don't think it would hurt.when it gets around 50 i will prob go back to the 5w-40 but thanks yall for the help i needed it .as many problems that i have had to fix on my bike by now i should just about know it inside and out lol
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35640
- Torrance, CA
Originally posted by Mysuzyq View PostHmm...they should be the same at higher temps as I understand it, but differ in cold weather, no?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
fastpakr
Originally posted by jtrip View Postwell i pulled the breather hose off this morning and guess what the leak stoped so far. but i still will change the oil out to the 15w-40 as hot as it is here i don't think it would hurt.when it gets around 50 i will prob go back to the 5w-40 but thanks yall for the help i needed it .as many problems that i have had to fix on my bike by now i should just about know it inside and out lol
Comment
-
MUBULLDOG
20-50 Golden Spectro
I know I'm new to all this but I have read some good articles on Golden Spectro. I really just got back into bikes. I spent $450 on a 82 GS650L. Went through the reg maintence: new plugs (NGK), K&N oil and air filter. When I drained the oil, there was a good amount of gas mix in the oil. I think this came from the broken petcock valve, letting gas flow into the crankcase. Well I thought "Why not spend a little extra on good oil"? So I bought 3 qrts of the 20-50 Golden Spectro (almost $10 per qrt). Hope this helps.
Comment
-
I know I'll cop a belting over this , but .............
I use a 40W70 , which is about a 50W , mineral in my 'S . Gulf Western Comp 50 Plus for any Aussies interested .
I'm living in the tropics though .
Cheers , Simon .http://i258.photobucket.com/albums/h...esMapSimon.jpg
'79 GS1000S my daily ride in Aus
'82 (x2) GS650ET in the shed
Comment
Comment