Announcement

Collapse
No announcement yet.

what is the thickest oil we can use?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    this sounds stupid but its the top part of the motor the very top where the half moons are if that makes since

    Comment


      #17
      Hi,

      My half-moons have been through 3 valve adjustments now and are starting to leak a little. I've got extra sets so I'll be replacing them at my next valve check. In fact, I'll probably install them inside-out just to be different.


      Thank you for your indulgence,

      BassCliff

      Comment


        #18
        hay basscliff do you think the leak could be from the breather hose problem

        Comment


          #19
          Hi,

          If the breather is clogged it could exacerbate the issue.


          Thank you for your indulgence,

          BassCliff

          Comment


            #20
            That 5W-40 Rotella will be thicker than 15W-40 when the temps are really hot so not sure what you are trying to accomplish.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment


              #21
              Originally posted by Nessism View Post
              That 5W-40 Rotella will be thicker than 15W-40 when the temps are really hot so not sure what you are trying to accomplish.
              Hmm...they should be the same at higher temps as I understand it, but differ in cold weather, no?
              '82 GS1100E



              Comment


                #22
                well i pulled the breather hose off this morning and guess what the leak stoped so far. but i still will change the oil out to the 15w-40 as hot as it is here i don't think it would hurt.when it gets around 50 i will prob go back to the 5w-40 but thanks yall for the help i needed it .as many problems that i have had to fix on my bike by now i should just about know it inside and out lol

                Comment


                  #23
                  Originally posted by Mysuzyq View Post
                  Hmm...they should be the same at higher temps as I understand it, but differ in cold weather, no?
                  Synthetic oil is more stable at killer high temps, such as getting stuck in traffic on a hot summer day. It has a higher flash point and doesn't thin out as much under extreme conditions.
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                  Comment


                    #24
                    Originally posted by jtrip View Post
                    well i pulled the breather hose off this morning and guess what the leak stoped so far. but i still will change the oil out to the 15w-40 as hot as it is here i don't think it would hurt.when it gets around 50 i will prob go back to the 5w-40 but thanks yall for the help i needed it .as many problems that i have had to fix on my bike by now i should just about know it inside and out lol
                    The 15w40 won't be ANY thicker than the 5w40 in hot weather. The synthetic oil will give slightly better protection in extreme temperatures, so if anything you're better off leaving it in place.

                    Comment


                      #25
                      20-50 Golden Spectro

                      I know I'm new to all this but I have read some good articles on Golden Spectro. I really just got back into bikes. I spent $450 on a 82 GS650L. Went through the reg maintence: new plugs (NGK), K&N oil and air filter. When I drained the oil, there was a good amount of gas mix in the oil. I think this came from the broken petcock valve, letting gas flow into the crankcase. Well I thought "Why not spend a little extra on good oil"? So I bought 3 qrts of the 20-50 Golden Spectro (almost $10 per qrt). Hope this helps.

                      Comment


                        #26
                        I know I'll cop a belting over this , but .............
                        I use a 40W70 , which is about a 50W , mineral in my 'S . Gulf Western Comp 50 Plus for any Aussies interested .
                        I'm living in the tropics though .

                        Cheers , Simon .
                        http://i258.photobucket.com/albums/h...esMapSimon.jpg

                        '79 GS1000S my daily ride in Aus

                        '82 (x2) GS650ET in the shed

                        Comment

                        Working...
                        X