Announcement
Collapse
No announcement yet.
Tach question
Collapse
X
-
Tach question
I have to replace the o ring in my tach drive. I took out the bolt and retainer plate and tried to pull out the drive. It will not come out. Is it because the o ring has hardened, or am I missing something. I can turn it with my fingers. I don't know how hard I should be prying on it. Thanks for any advice. 1979 GS750E 8 valve.Tags: None
-
ChicagoBob
I had the same problem on my 550 and, after removing the retainer screw, pried gently around the circumference of the drive until it loosened.
-
BassCliff
Hi,
On my bike, there is a little locking tab with a screw that must be removed. Then you must use a couple of screwdrivers to gently pry it out. You might try turning the motor just a little to relieve any pressure on the tack gear so that it comes out uninhibited. Click the link below. See if the documentation will help you. Let us know.
Replace Tach Cable Seals
Thank you for your indulgence,
BassCliff
Comment
-
OLDENUFF
You guys are great. Got both seals changed this weekend and no more leak. Thanks for all your help. Great having knowledgable people to call on.
Comment
-
raistian77
Comment