Announcement

Collapse
No announcement yet.

Suzukimatic seat removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Suzukimatic seat removal

    How do I remove the seat from a Gs450GA? I found the 2 clips in the middle left and right side but the front and rear will not let go.

    #2
    I just looked through the owner's and service manuals for the 450 (not specifically the GA, though) that are available on BassCliff's site. I saw nothing specific to seat removal, in fact, the only mention is in the section that details fuel tank removal. In there, it says "to remove the tank, ensure the petcock is in the ON position, remove the seat, remove the bolt that holds the tank, ... " etc.

    I get the impression that is shouldn't be all that difficult.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      Hi,

      There is a GS450GA Owner's Manual on my site. It should be helpful.


      Thank you for your indulgence,

      BassCliff

      Comment


        #4
        Originally posted by BassCliff View Post
        There is a GS450GA Owner's Manual on my site. It should be helpful.
        You sure about that?
        Originally posted by Steve View Post
        I just looked through the owner's and service manuals for the 450 (not specifically the GA, though) that are available on BassCliff's site.
        I saw nothing specific to seat removal, ...

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Hi,

          GS450GA Owners Manual (2MB)

          But I find nothing specific to removing the seat.

          Thank you for your indulgence,

          BassCliff
          Last edited by Guest; 09-09-2010, 05:40 PM.

          Comment


            #6
            Seat removal

            Hello, you must unfasten the rear cowl support at the rear fender then undo the spring clips on each side near the front. This is the only way........ Bob

            Comment


              #7
              Seat

              Hey, by the way. If you destroy that seat, I just happen to have one that was redone..................... Bob

              Comment

              Working...
              X