Announcement
Collapse
No announcement yet.
Tach and drive
Collapse
X
-
Tach and drive
Hi fellow GS'ers, Does anyone know of a company that can rebuild and or calibrate tachometers for a 80 GS750ET? I have two and both are not working right, one is flipping all over the dial and the other is about 3-4 thousand rpm too slow. Or does anyone out there have a good working one to sell?sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Tags: None
-
1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
-
gauges
Originally posted by pete View PostI'd suggest reading this first and seeing if some lube fixes them:
http://www.thegsresources.com/_forum...ad.php?t=76095
Was the first thing I did, new cables all cleaned and lubed gauges still crap. Even the bushings in the gauge drives were lubed.sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
Comment
-
Bugger, time to start looking for a replacement then I would guess... hopefully something reasonably priced pops up on eBay or a wrecker for you.1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
Comment