Advice on fork brace

[azr]

I'm wanting to throw a fork brace on my 78 GS1000. Looks like a lot of people use the Tarozzi clip-ons but I thought I would throw it out there to the collective hive before I spent any money. I'll also post in the parts wanted section when I sort out what to get.

[Agemax]

micron are the best braces, dont recommend telefix myself but others may disagree.
see them quite often on ebay

[mustangflyr]

micron are the best braces, dont recommend telefix myself but others may disagree.
see them quite often on ebay

I've used a telefix for near thirty years on my GS1000, made a noticeable difference mostly on low speed sharp bumpy turns plus easy install.

[salty_monk]

The Tarozzi ones work well & are easily available/ good price.

[Big T]

Rob,

I've got a tatty saddle brace (like on my 1000) if you want to stay period

[BassCliff]

Hi,

I concur with Mr. salty_monk.



In fact, it was Mr. salty_monk himself who put together a deal where a bunch of us pitched in and bought about a dozen Tarozzi braces at the same time in order to get a better price. It's a good "bang for your buck" piece of gear.


Thank you for your indulgence,

BassCliff

[Agemax]

the Tarrozzi braces look cool and well made. i would still stay away from a telefix though

[mustangflyr]

the Tarrozzi braces look cool and well made. i would still stay away from a telefix though

Why? Thanks

[Agemax]

Why? Thanks

because they have a reputation of locking the forks up and my mate died as a consequence of it

[850 Combat]

My 1000E and one of my 1000G's have a Telefix. The Skunk had it when I bought it, but I just installed it on the G. I had to slot the fender mounting holes quite a bit to lower the fender. There is still plenty of tire clearance, but it was a pain. One of my other 1000G's has a different brand that looks better, but I can't remember what it is.

The fender on a G is a pretty solid piece in itself. It must be adding some regidity on its own.

[TooManyToys]

I've had a Teleflex on my bike since 1983 and it's been fine. They all just need to be set up correctly from the start.

[Nessism]

I've had a Teleflex on my bike since 1983 and it's been fine. They all just need to be set up correctly from the start.

I'm imagining that if the bolts holding the two half's together slip a binding condition can occur. Not the safest failure mode.

[850 Combat]

I'm imagining that if the bolts holding the two half's together slip a binding condition can occur. Not the safest failure mode.

Is there one made other than the saddle type without this feature?

[Agemax]

Is there one made other than the saddle type without this feature?

micron are a good solid brace,2 fork clamps and a single solid ally plate joining them together. probably others around as well

[Nessism]

Is there one made other than the saddle type without this feature?

Tarozzi braces are nice. Put one on my 1000 and it fit nicely.