Announcement
Collapse
No announcement yet.
Gs650l?
Collapse
X
-
Rauzer
Gs650l?
So I just bought an 82 GS650L, at least thats what it says on the side. I've been looking for some upgrade/maintenance parts, but I cant find anything for a GS650L. I've seen GS650GL, is that the same thing? Any advice would be greatly appreciated. Thanks!Tags: None
-
Yep, same thing. For some reason, the "L"s never had the "G" as part of the artwork on the side, even though the standard "G" did.
BassCliff will be along shortly with his "Welcome Wagon" bit, so sit tight, get ready for LOTS of reading material.
.Last edited by Steve; 03-05-2011, 04:37 PM.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Rauzer
Originally posted by Steve View PostYep, same thing. For some reason, the "L"s never had the "G" as part of the artwork on the side, even though the standard "G" did.
BassCliff will be along shortly with his "Welcome Wagon" bit, so sit tight, get ready for LOTS of reading material.
.
Comment
-
Don't try the MC off your 'Busa.
All the 'Busas I have seen have had two disks on the front wheel, your 650L only has one. Yeah it makes a difference.
If you change your bars, look into changing your cables, too. Cables from a 650G will be shorter because the G came with more "normal" bars.
If you go with bars that are even lower and/or shorter, something from a 450S might work.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
BassCliff
Greetings and Salutaitons!!
Hi Mr. Rauzer,
Let me share some GS lovin'.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
Rauzer
Lots of info there! I saw your website when I was poking around earlier. I just ordered a Clymer manual, it's worked great on my Busa. Think I'm going to get a set of bars that seem to be from a 650G maybe.
Comment
Comment