Announcement
Collapse
No announcement yet.
GS 450L running kind of
Collapse
X
-
Ooops! I hate it when my bike makes me look like a fool... done stuff like that too, very frustrating, but at least now you got good new rubbery boots to give a nice seal to the intake1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
-
John Mellencamp
-
Hmmm something doesn't seem right there... lots of smoke, is it blue?
Seems maybe it's rich? Not sure, but it definitely isn't idling smoothly.
It does sound mechanically good, just not firing right, whether it's fuelling or ignition though I'm not sure...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
John Mellencamp
Comment
-
refeicul
Comment
-
John Mellencamp
Carb sync not going as planned . A cookie for anyone who knows why the guages are not going up very much on the carbtune . I put the restrictors on at the carb end of the hoses and at first the guages seemed to go up a little so I tightened everything up and now nothing . Is it I don`t need restrictors in the hoses ?
Comment
-
John Mellencamp
Well i tryed adjusting the screw and could get one side to go up and then the other so i stopped midway between them .
Comment
-
Haven't had the opportunity to listen to the vid yet, just watch with no sound, good to see you got to go for a ride and got it sorted1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
John Mellencamp
Another update cleaned the tank with evaprust ,cleaned carbs again , still dosn`t idle very good and the revs don`t seem to rise as quickly as they should . http://www.youtube.com/watch?v=5LvB1jVjrhg
Could it be something electrical and if so what ?
Comment
Comment