GS750 1977 Side Stand

[ybot1966]

just as i got my GS750 1977 up and running some ass drives into my bike bay and bent the side stand inwards rather than out, wondering if anyone has any photos of the sidestand bracket that attachs to the frame so i can gauge how it should look when not bent.

thanks

tony

[7981GS]

It angles slightly down in the center of the frame.
I could get a pic or two later today if you wish.

Daniel

[ybot1966]

It angles slightly down in the center of the frame.
I could get a pic or two later today if you wish.

Daniel

that would be great, as of now the actual stand swings down but it seems vertical rather than before when it swung out to the left, i need to see what the bracket should look like cos i think thats should be at an angle rather than straight down

regards

tony

[7981GS]

I was mistaken.
The stand on the frame actually goes UP!
The mount that bolts to it, goes DOWN.



The thing going across the frame is a metal level. The measuring stick is for reference only from the top.
The frame is currently elevated on 3 jack stands.
One of the two bolts that hold the mount is in the pic.
Tell me via PM if you need some better pic's/ measurements.

Daniel