.png "Powered by vBulletin")
My chain has a few links they are hard to move. maybe 8 or so. I did try spraying it down with PB blaster and it helped a little. Any other things I can try before I spend lots of $$ on a chain and sprocket set?
-
-
No .
Cheers , Simon .http://i258.photobucket.com/albums/h...esMapSimon.jpg
'79 GS1000S my daily ride in Aus
'82 (x2) GS650ET in the shed -
Your ride will be quieter and smoother.
It is time.2@ \'78 GS1000Comment
-
You can put the chain on blocks on each side of the stiff joint and work them back and forth with a hammer to TEMPORARILY loosen them so they dont eat your sprockets..if they havent already. But as said already its time for a new one sooner than later.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
if it's just crud build up that is causing the bind, and not because of worn links and such, get some kerosene, put in container, and let it sit for a day or 2, then wipe down, and get your favorite chain lube, and see if it's better. If no, get new chain and sprockets.
.Comment
Comment