Saddlebag supports

[Steel Toed Tank]

Any small fabrication shop or stair and rail shop can whip you up something cheap and sturdy. Just bring your bike by a shop and tell em what you need.
Conduit will never have the strength you want. They will likely bend a piece of 1/4 inch to 3/8ths round stock and weld tabs on the end with drilled holes for mounting at the spots you want. I bet it would be pretty cheap.

I'm not sure where you live, but in Canada if you show up with a tray of coffee and a box of donuts you'd likely get something fabbed up right away and for free or very little cost.

You'd have to paint it yourself though.

This is what I would do if I was you.



Tank

[gripweed]

Any small fabrication shop or stair and rail shop can whip you up something cheap and sturdy. Just bring your bike by a shop and tell em what you need.
Conduit will never have the strength you want. They will likely bend a piece of 1/4 inch to 3/8ths round stock and weld tabs on the end with drilled holes for mounting at the spots you want. I bet it would be pretty cheap.

I'm not sure where you live, but in Canada if you show up with a tray of coffee and a box of donuts you'd likely get something fabbed up right away and for free or very little cost.

You'd have to paint it yourself though.

This is what I would do if I was you.



Tank

Yea, this is my next step. I got a number for a guy who does fabrication for a bike shop down the road from me. I may have lucked out.