Announcement
Collapse
No announcement yet.
Carbs leak through over flow
Collapse
X
-
SOCKinside
Carbs leak through over flow
When parked after riding, carbs tend to leak through over flow, I'm guessing it's a floater issue? It's not a big leak but nonetheless a leakTags: None
-
Originally posted by SOCKinside View PostWhen parked after riding, carbs tend to leak through over flow, I'm guessing it's a floater issue? It's not a big leak but nonetheless a leaksigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
-
SOCKinside
sorry, its 79 gs1000 im not sure if they have work on them, my guess is yes, it has pods, and a vance hines4-1, the petcock has a vacuum to it yes
Comment
-
Originally posted by SOCKinside View Postsorry, its 79 gs1000 im not sure if they have work on them, my guess is yes, it has pods, and a vance hines4-1, the petcock has a vacuum to it yes
78-79 had different carbs and petcock from the '80.
Did you leave your bike parked with the petcock on prime?
Sidestand or Centerstand?sigpic
Steve
"The world is a book, and those who do not travel read only one page." :cool:
_________________
'79 GS1000EN
'82 GS1100EZ
Comment
-
SOCKinside
i dont know if my petcock is on prime or on, its missing the lever it only has a side stand! 1979 GS1000E
Comment
-
SOCKinside
i found this one on ebay, but mine looks just like it, now that u mention it, it might just be on prime, im gonna try to turn it with a small end flat head
Comment
-
SOCKinside
-
SOCKinside
-
I believe the longer end is the "pointer" and therefore that would be prime..try turning it 180 so its pointing to the front of the bike..If it goes then that would most likely be reserve..thus straight up and down would be ON. As for whats leaking..could also be the bowl gaskets and gas will run to the lowest point before dripping. Get a good trouble light and wipe each carb down and look at the gaskets to see any new weeping. Also look closely at the fuel tee and the transfer tubes. If you have hoses on them and the outside of them are dry but it drips out the hose, then that would tell me its a float height being just a tad too low..raise it up 1MM and then see what happens. While your in there, take a Qtip and some laquer thinner and swab out the float needle seat too..a little build up on them will cause leakage as well.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
OLDENUFF
-
SOCKinside
-
My question would be: why does your '79 bike have the "dreaded '80 petcock"?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
That petcock came on the 1980 bikes, but at least one person here said their '79 GS1000 came with one also. Maybe Suzuki made a late production change over? What is the manufacturing month of this bike?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Denny Lee
Carbs leak through over flow
I have a 1979 GS-850G that I just finished with a complete top end, carb rebuild, and Dyna Electronic Ignition job. Runs great, BUT it appears I need to rebuild the petcock as well. It spits gas back out through the over flow tubes two or three times after shut off. Does that sound like a petcock problem? What is the Dreaded 80's Petcock problem? Is that what I might have? What the recommended solution?
ALSO, I replaced my starter while I had the carbs off and now - even before - it just clicks sometimes and other times it kicks right in when I hit the button. Could this be my button is in need of repair, cleaning, or replacement? Other possibilities?
Comment
Comment