.png "Powered by vBulletin")
Does anyone know that the torque values are for the bolts on the intake horns on a 81 850?
-
-
There is a listing of these values in the FSM for my bike.
Check to see if Basscliff has your manual on his site. -
yeah, ask Basscliff... he's all Torque and no trousers!!!!
(see what i did there... sorry basscliff)
XXXComment
-
I've looked in my maint. manual and it does not specify the intake boots.Comment
-
Torque--tighten till you hear it bark at least twice, Old school LMAO...sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike
1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Comment
-
Those are M6 bolts going into aluminum, so 6.0-7.5 lbs-ft.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Thanks for the helpComment
Comment