.png "Powered by vBulletin")
Well I have put nearly 1000 miles on the 73 Yammy TX750 and time for the first oil change. When we first rescued her, my buddy Randy had some Honda JP4 synthetic blend that we put in. Thing is its a 40+ mile round trip to the Honda dealer just to get the oil. I have been eyeballing several "motorcycle racing oils" at the local auto parts. Randy says that due to the balancer issue of foaming up the oil that I should run only racing oil because of the anti foaming properties. Anyone have knowledge of regular OTC oils other than Honda specific oils that will perform accordingly as far as anti foaming goes? Not so much concerned with the synthetic blending or not, just that its a rock solid durable oil for this engine.
-
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Oh oh here we go...
sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong. -
Go get a gallon jug of Rotella either dino or syn your preferenceComment
-
Its not an "OH OH HERE WE GO"....Its a legitimate question. I know less about modern conventional oil formulations than i do about any other subject on earth. The article from a Classic Yammy mag from back in the day ( written by the guy in charge of the recalls and repair program for Yamaha ) stated that had they had "TODAYS" oil technologies back then there wouldnt have been an issue with the oil foaming and loss of engine lubrication. So this has made me ask myself." Just what does he mean by "TODAYS TECHNOLOGY"? I am asking because i want to understand and gain knowledge and not start a pizzing match. Read this article and then answer...
Last edited by chuck hahn; 10-12-2012, 07:08 PM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
What is JP oil I cannot find it anywhere.Comment
-
Honda JP4 is Hondas synthetic blend. I may not be remembering the name right..but anyway, its Hondas synthetic blend racing oil.Last edited by chuck hahn; 10-12-2012, 07:15 PM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I do a web search and it shows me jet fuelComment
-
Yeah i know JP4 is jet fuel...but i am not gonna run 3 miles over to the storage unit just to read the old bottle in the bin.. Gold colored bottle, black label, red lettering on the name..HA HAMY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
1982 GS1100GL Citrus County, FL
a rare outsider and was only built until 1983. Who still has one, it gives her so little.Comment
-
You were close, Chuck.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/Comment
-
HP...JP....Whatever!! LMAO But yes thats the stuff Randy gave me. So far it has performed well. Like i said, Im no OILOLOGIST so therefore my question.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Sorry frank!!!!!
I keep forgetting that there is an "OTHERS" section for this question...SORRY FRANK!!!!!MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
just to add and yes off topic but...
rotella has very little zinc left in it due to cat converters on newer vehicles/government regs and such.
rotella is not even close to what it used to be.
now old stock rotella from several or more years ago...thats a diff story.
brad penn oil is loaded with zinc and is the original Kendall green oil formula.
about 8 bucks per quart to your door...good stuff for sure.Comment
-
So, specifically, do todays modern regular conventional oil stand up to anti foamimg as the thought to be superior "racing" formulas? Whats the specialness of a racing formula made by a motorcycle maufacturer or ..lets say.. Off the shelf auto parts store Valvoline conventional racing oil??? Guess i am trying to sort it out between all the spin doctoring manufacturers claim.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
Comment