Announcement

Collapse
No announcement yet.

1150EF Choke Lever Bolt?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1150EF Choke Lever Bolt?

    Hi Everyone,
    My new to me 84 1150EF is coming along, surprisingly new Barnett clutch springs stopped it slipping and rebuilding the petcock has solved the problem with #2 fouling its plug; I had taken it for a short run before tackling some fairing bracket fit issues when I suddenly realised that the choke lever was waving around on the end of the cable!!!
    Luckily did not lose the plastic bits, just the bolt, hoping someone can tell me what it looks like and if available, I "ass u me" that it will be a Suzuki specific shoulder screw, but have never seen it.
    I also need to replace the oil seal at the clutch shaft, does anyone know if there is a standard size seal available for it?
    Many thanks
    Trevor T.
    84 1150EF in Durham (the town) ON

    #2
    Hi,

    I believe you are speaking of #16 here:



    #16 SCREW 02112-7516A (replaces 37574-49440) about $1.50 at partshark.com.


    Supposedly we can determine the fastener size by the part number. But I don't know whether it would be a 9x44mm or a 5x16mm.


    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      Hi,

      Perhaps you are looking for #29 here:



      #29 OIL SEAL 09285-12006 (replaces 09285-12002) about $4.25 at partshark.com.

      Thank you for your indulgence,

      BassCliff
      Last edited by Guest; 10-31-2012, 06:45 PM.

      Comment


        #4
        Originally posted by qcktvr View Post
        Hi Everyone,
        My new to me 84 1150EF is coming along, surprisingly new Barnett clutch springs stopped it slipping and rebuilding the petcock has solved the problem with #2 fouling its plug; I had taken it for a short run before tackling some fairing bracket fit issues when I suddenly realised that the choke lever was waving around on the end of the cable!!!
        Luckily did not lose the plastic bits, just the bolt, hoping someone can tell me what it looks like and if available, I "ass u me" that it will be a Suzuki specific shoulder screw, but have never seen it.
        I also need to replace the oil seal at the clutch shaft, does anyone know if there is a standard size seal available for it?
        Many thanks
        Trevor T.
        84 1150EF in Durham (the town) ON
        Just order the correct parts from your local Suzuki dealer - under $10 and everything will fit right on
        1978 GS 1000 (since new)
        1979 GS 1000 (The Fridge, superbike replica project)
        1978 GS 1000 (parts)
        1981 GS 850 (anyone want a project?)
        1981 GPZ 550 (backroad screamer)
        1970 450 Mk IIID (THUMP!)
        2007 DRz 400S
        1999 ATK 490ES
        1994 DR 350SES

        Comment

        Working...
        X