Announcement

Collapse
No announcement yet.

550 chain tension

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    550 chain tension

    My chain seems to be a lot looser than it should be..at least to me. I don't know how much play it's supposed to have, so i'd like to see if someone could tell me? My dad said 1 inch up and 1 inch down from the middle between the sprockets. BUT, i've heard too that different bikes are different tensions.

    #2
    your dad is almost correct.an inch play total is about right,so 1/2 inch up and 1/2 inch down. make sure you measure the chain slack while you are sat on the bike, with both wheels on the ground (ie. not on the main stand)
    Last edited by Agemax; 04-25-2013, 04:01 AM. Reason: corrected myself
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment


      #3
      "You on the bike" is somewhat repeatable, but hard to measure your chain slack without help.

      The IDEAL conditions under which to measure slack is when the center of the front sprocket, the swingarm pivot and the rear axle are all in a straight line.

      That is when the chain will be the tightest. You can set that condition once, and adjust your chain accordingly, then put the bike on the centerstand, measure the slack in that condition, then maintain that measurement, knowing that it will be OK when the three points line up.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Originally posted by Steve View Post
        "You on the bike" is somewhat repeatable, but hard to measure your chain slack without help.

        The IDEAL conditions under which to measure slack is when the center of the front sprocket, the swingarm pivot and the rear axle are all in a straight line.

        That is when the chain will be the tightest. You can set that condition once, and adjust your chain accordingly, then put the bike on the centerstand, measure the slack in that condition, then maintain that measurement, knowing that it will be OK when the three points line up.

        .
        i can quite easily sit on my bike and reach down to check the slack! if that is a physical challenge then it is not that much effort to get your dad/girlfriend/wife/husband/mate/dog/cat.......whoever to assist you
        1978 GS1085.

        Just remember, an opinion without 3.14 is just an onion!

        Comment


          #5
          Different bikes have different settings, depending on the wheel travel and the method(s) used to take up the extra slack. For a GS, you are on-track.

          Comment


            #6
            Sweet sweet. I'm gonna have my girlfriend come over in about an hour and sit on the bike. She said i have to make motorcycle noises the whole time -_- haha

            Thanks everyone

            Comment


              #7
              If you have twin shocks, just take the shocks off to find Steve's sweet-spot easily. It seems like work but answers this question once and for all-Is my chain too tight?

              kick wood blocks under the rear wheel or a lever+blocks to adjust the height of it while you fiddle (ie: to find maximum swing-arm-to-drive-sprocket dimension)

              Comment

              Working...
              X