Front brake rebuild

[BIG_brother]

OK, I have purchased rebuild kits for my front master cylinder and front calipers

Is there a tutorial on this anywhere?

[spyug]

How about this :http://members.dslextreme.com/users/...r_overhaul.pdf

On Cliff's site for your convenience.

Good luck with it.

[BIG_brother]

Awesome thanks.... what about the master cylinder?

[spyug]

I don't see one on the masters, sorry but what you can do is have a look at the part's fische on some site like Bike Bandit. The exploded view will show you what you are up against. They are very straight forward, just take out the retaining c clip and the piston, springs and such will come out. Clean the bore and piston of gunk. Clean the reservoir and return hole of gunk then reassemble.

The hardest part is often getting the c clip out.

good luck.
spyug

[Nessism]

Make sure the small return port is open (very small hole), and inspect the bore carefully for pitting in the metal. Corrosion takes out a lot of masters.