bottom end pan inspection

[Guest]

Ive got the oil pan removed to be replaced. I just thought id ask if there was any key things to inspect, replace or clean since i dont get into there very often..

Pan has a little grunge but nothing metalic in it.
Magnet is clean
Screen looks pretty clean..

Anything else u should play with or just leave it alone?

[bbjumper]

I guessin the grunge is from not to frequent oil changes by the PO and will not reoccur. New OEM gasket on a clean surface, be careful on torquing the bolts and run it.

Cheers

[1948man]

Are you replacing the pan, or just the gasket? Pan looks okay.

[bbjumper]

Are you replacing the pan, or just the gasket? Pan looks okay.

My guess it's the drain plug..

[08rangerdan]

Sorry yea was just the gasket. I wasnt sure if there was any pump parts i should look into or repair while im in there. New gasket was the wrong part so in waiting on a different one

[hjfisk]

Drop the screen and clear it out while you are in there