Announcement

Collapse
No announcement yet.

Who sells long impact driver tips...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Who sells long impact driver tips...

    For a hand impact driver. Sears no longer carries long ones, don't want to buy yet another impact driver just to get the tips, I already have about seven of them. Harbor freight tips tend to shatter when you use them.
    Anyone have a source?
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    #2
    HI look at these on ebay # 290934028472 they are 2 "

    Comment


      #3
      Originally posted by tbirdhd View Post
      HI look at these on ebay # 290934028472 they are 2 "
      Thanks, I just bought that same package at Sears for $6. It is for an electric impact, they are too small for a hand impact driver.
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

      Comment


        #4
        I get 4 & 6 inch long bits from my Snap On dealer. They will fit a regular 1/4 inch socket if you don't want to buy the whole sockets from them. Ray.

        Comment


          #5
          Could you use a short extension where you pull off the cap of the driver?
          Or is the cap to wide to fit where you need?

          Comment


            #6
            The cap is too wide.
            http://img.photobucket.com/albums/v5...tatesMap-1.jpg

            Life is too short to ride an L.

            Comment


              #7
              I just got a set from sears last week.

              Nic
              83 GS1100ES rebuild:

              http://www.thegsresources.com/_forum...d.php?t=170032

              Budget GSXR Conversion:

              http://www.thegsresources.com/_forum...d.php?t=200563

              New to me bike: 2008 B-KING

              Comment


                #8
                Originally posted by niclpnut View Post
                I just got a set from sears last week.

                Nic
                Just the long tips or did you buy the whole impact?
                http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                Life is too short to ride an L.

                Comment


                  #9
                  I have been looking also, the bits for the hand impacts are more like 5/16.
                  81 gs 1100 E One owner,Me.

                  Comment


                    #10
                    Originally posted by jabcb
                    The Vessel 2400 & 2500 series impact drivers use 8mm (5/16") hex bits.
                    Thanks for the link
                    81 gs 1100 E One owner,Me.

                    Comment

                    Working...
                    X