Turn Signal Bushings

[Guest]

Anyone know where I can find the rubber bushings for turn signals? My 81 550L needs em since my buddy took her horizontal.

[GSX1000E]

#10 or 24 here?: http://www.partsoutlaw.com/oemparts/...rn-signal-lamp

[A-train]

#10 or 24 here?: http://www.partsoutlaw.com/oemparts/...rn-signal-lamp

Rear, so 24, but mine has them on the inside of the brackets too... Should it not? Or am I looking at this wrong?

[Steve]

Rear, so 24, ...

Look closer, they are the same part number.

..., but mine has them on the inside of the brackets too... Should it not? Or am I looking at this wrong?

Not easily shown in the parts fiche, but it is a grommet that goes through the hole in parts 29 &30 on the rear and the headlight bucket in the front and actually sits on both sides.

.

[Griffyn]

I need those too since the yob of a PO threw mine out when he trashed the signals. Got signals now, just need the bushings.

Hoping for a used solution because shipping is almost as much as the cost of the new parts.

[A-train]

Look closer, they are the same part number.



Not easily shown in the parts fiche, but it is a grommet that goes through the hole in parts 29 &30 on the rear and the headlight bucket in the front and actually sits on both sides.

.

THX Steve.

[GSX1000E]

THX Steve.

And I didn't help in the least.

I guess that I NEED to up my post count by commenting in every single thread eh?
Not going to happen. My ego is just fine as it is. Carry on...

[Steve]

And I didn't help in the least.

I guess that I NEED to up my post count by commenting in every single thread eh?
Not going to happen. My ego is just fine as it is. Carry on...

That does not even deserve a reply, so I won't.

.

.

[tkent02]

I need those too since the yob of a PO threw mine out when he trashed the signals. Got signals now, just need the bushings.

Hoping for a used solution because shipping is almost as much as the cost of the new parts.

I may have what you need, but the shipping will probably still be the same.

[A-train]

And I didn't help in the least.

I guess that I NEED to up my post count by commenting in every single thread eh?
Not going to happen. My ego is just fine as it is. Carry on...

Sorry brother! Yess, all is helpful....

[Griffyn]

I may have what you need, but the shipping will probably still be the same.

And I see BikeBandit has lowered their shipping to $9.99, which means the next time I need to order something form them I can justify adding the bushings to the list. Now all I need now is patience.

[Steve]

And I see BikeBandit has lowered their shipping to $9.99, which means the next time I need to order something form them I can justify adding the bushings to the list. Now all I need now is patience.

Why do you insist on wasting money? Bike BANDIT's price on that bushing is $4.13, the link to Parts Outlaw in post #2 shows it for $3.15.

EVERYTHING on Bike BANDIT's site is similarly priced. They are the second-most-expensive vendor that I know of, and they use their own parts numbering system, which makes it a bit more difficult to find some parts.

I still feel that they earned the name "BANDIT".

.