What goes behind this bolt?

[Guest]

1DD256E7-9F72-4BE1-A6DF-1F6F52838425.jpg

I am installing the brackets and foot pegs on my '81 GS1100. Something looks off. There seems to be a spacer or something missing behind the bracket (between frame and bracket) on the bolt I am pointing to. The reason I think this is because there is a 1/4 inch space there and if I tighten the bolt as is I will bend the bracket. Can anyone enlighten me?

[GSX1000E]

Can you take some pictures looking behind it or with the footrest mount off?
Something appears to be bent. This IS for your '82 1100G, right?

http://www.partsoutlaw.com/oemparts/a/suz/50d4043ff8700230d8b4ed0a/footrest-model-z

[mrbill5491]

Probably the rear brake adjustment bolt?

[Scratcher09]

Yes, this is my '82GS1100. The middle lower hole that I am pointing to is not on the same plane as the other holes. It fits together nicely if I put five washers between the bracket and frame. There has to be something that goes there.

[jsandidge]

My bike has a piece that bolts there that acts as a stop to keep the brake lever from returning up too high.

[GSX1000E]

I went out and took a couple of pic's of one of my '82 GS1100G's. Hope these help. (Excuse the dirt please.)

[Scratcher09]

From GSX1000E's pic looks to me like my lower tab has been bent inward about a 1/4 inch. There doesn't seem to be any evidence that this bike has been down so that seems peculiar to me. So now I'm wondering if I should attempted to bent it back or should I just use the washers as a spacer to compensate for the difference?