Announcement

Collapse
No announcement yet.

Throttle cable routing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Throttle cable routing

    I recently rebuilt my carbs and have had my bike disassembled (down to the frame). I am trying to figure out how the throttle cable is suppose to be routed. Currently I am having troulble setting the idle. It fluctuates if I just lightly touch the cable housing and it surges when I turn the bars.

    #2
    Originally posted by Scratcher09 View Post
    I recently rebuilt my carbs and have had my bike disassembled (down to the frame). I am trying to figure out how the throttle cable is suppose to be routed. Currently I am having troulble setting the idle. It fluctuates if I just lightly touch the cable housing and it surges when I turn the bars.
    Do you have a service manual for your bike, if you do there is a diagram that shows the routing of your throttle cable. If not, go to Basscliff's websiste and see if he has a manual for your bike there, though I pretty sure any 1100 manual from 80-83 will give you a good idea how to route your cable.
    sigpicMrBill Been a GSR member on and off since April 2002
    1980 GS 750E Bought new in Feb of 1980
    2015 CAN AM RTS


    Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

    Comment


      #3
      I was not aware the routing pictures were there. Thank you. I think this will help.

      Comment


        #4
        Originally posted by Scratcher09 View Post
        I was not aware the routing pictures were there. Thank you. I think this will help.
        Most welcome.
        sigpicMrBill Been a GSR member on and off since April 2002
        1980 GS 750E Bought new in Feb of 1980
        2015 CAN AM RTS


        Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

        Comment

        Working...
        X