Tach Driven Gear broken - Frustration runs high !

[Wingsconsin]

Mine seems to have sheared off the end on the right as pictured...
It will not drive the Tach as there is no flattened end to fit into the slot on the cable.
Can I buy this part seperate and replace it without tearing into the engine?
I think (?) I can simply take out the holder sleeve and slip in the new driven gear ..? Yes ?
Any suggestions on where to purchase a new driven gear --or am I in for a new electroni tach modinfication ?

[Brendan W]

Here is one source http://www.cmsnl.com/suzuki-gs850-19.../#.VgQLCKeYO1E
I've just put mine back in with the cam in place. Piece of cake.
If you lived around here we could go up the back to my friend Johannes shed ( he calls it machine shop) and make up something to fix the end.

[Crankthat]

Yes, take out the sleeve and likely the gear will go with it.
The gear may be left behind.
In that case put a bit of twist on whatever is sticking out to unmesh the splines.
The seals inside the sleeve x2 are real cheap and worth replacing.
I just checked my valves last weekend and on my model the sleeve/gear sits in the cover and must be removed before the cover.
I inserted the gear first this time, and then the sleeve over it.
Easier then both at same time.
Did have to lightly tap on a piece of wood to get it to drop over.

Would want to figure out why/how it broke off before replacing though.

[Brendan W]

My money is on a locked up cable.

[Wingsconsin]

My money is on a locked up cable.

I thought so too...
So I unsheathed the cable - and worked it from the bottom..and all is well
I really believe this is an operator error situation.
A few weeks ago the cable had loosened up and was just hanging there.
I put it back in and tightened it up.
I DO NOT remember checking to be sure it was mated properly..and I think I just somehow killed it.

I blame ME

Still seeking a place in the USA to purchase this part.

[eil]

I replaced mine a while back, it's simples. (Assuming the sleeve is not stuck in the head, like mine was. Then it's a pain.)

You shouldn't have too much trouble finding a new one. Should be the same part on nearly all 8-valve GSes. They're $25 new from partsoutlaw. There are a bunch of used ones on eBay too but you have to be careful you don't get one from a bike with the gear in the valve cover because those go in the opposite direction.

Like Crankthat said, get the seals too.

[Crankthat]

Brand New Genuine Suzuki Tachometer Gear. Part Number 26431-45001. Fits GS750 (1977-1979), GS850 (1979-1983), GS1000 (1978-1981), GS1100 (1982-1983) Motorcycle Models.

Possibly this info will help you find one?

From this add, http://www.ebay.com/itm/Suzuki-Tacho...25.m3641.l6368

[Brendan W]

I thought so too...
So I unsheathed the cable - and worked it from the bottom..and all is well
I really believe this is an operator error situation.
A few weeks ago the cable had loosened up and was just hanging there.
I put it back in and tightened it up.
I DO NOT remember checking to be sure it was mated properly..and I think I just somehow killed it.

I blame ME

Still seeking a place in the USA to purchase this part.

No one gets a free ride

[Crankthat]

Found this also.

http://www.mrcycles.com/oemparts/p/suzuki/26431-45001/gear-tacho-driven-nt-10

Like eil typed most 8 valve Gs's.

[Wingsconsin]

Part ordered - Next week arrival -
Thanks to all for talking me through this -
I blame me - I broke it - and now I gotta fix it.
Although riding without a tach isn't too bad...
I rarely look at it anyway and shift by ear --

[tkent02]

Tachs and speedos, merely crutches for the incompetent.

[storm 64]

Tachs and speedos, merely crutches for the incompetent.

Same with Altimeters, Radios/Radar but they're sure nice to have

[Wingsconsin]

The Tach & Speedo on this bike have never really worked too well since I got it.
I am gradually getting things back to working order , and adding some personal touches as well
I installed the GPS bracket last night so now I can transfer my Zumo from 1 bike tot he other depending on which I am riding.
Hopefully I will need the gps next year as a longer ride is on my radar - visiting a new service garage I have heard about

[growler]

I replaced my tach seals and I'm familiar with the part, message me if you need help!

[Steve]

Hopefully I will need the gps next year as a longer ride is on my radar - visiting a new service garage I have heard about

He moved, left no forwarding address.

.